Thursday, April 11, 2013

History of libraries



Go to youtube to the following link:

Refer to e-book:

The History of Libraries: Through the Ages

Library by Boltron on Flickr
Library by Boltron on Flickr
Libraries have a reputation for being oh-so-boring places you visit only when you absolutely must. But on the contrary, these all-inclusive establishments are your friendly neighborhood cultural catchalls, holding the historical relics, documented research and readings of communities, governments and entire societies, dating back decades and sometimes even centuries or millenniums.
There is no doubt that libraries have had an impressively direct and significant impact on societies all over the world for thousands of years. Creating and providing an outlet for technological advancements, introducing and nurturing cultural artifacts, supporting the rise of various religions and helping to maintain a sense of historical structure, they have managed to help communities survive and thrive via numerous artistic outlets.
They’ve contributed immensely to our modern culture. But how did they get their start?

The Beginning: Archeological Findings of Ancient Libraries

Since the beginning of time, there has been a need to preserve artifacts in some fashion for later appreciation by new generations. As a result, it seems there has always been some form of a library in existence.

Archives of Egyptian historical records and literature.

Archeologists have spent centuries pulling together bits and pieces of history about our past. As a result of their research, they have managed to find what seems to be proof of the first libraries located in ancient Egypt.
Most of their conclusions were drawn from the information gathered by previous thinkers, philosophers and scientists who visited Egypt and were able to gather proof of documents found throughout the country in safe places equipped to store the documents.
In the paper, The Library in Ancient Egypt, Cairo University professor Dr. Abdel-Halim Nureddin explained that these safe places could only be described as libraries in that they required “classification, presentation and staff (librarians and many others)” just as modern libraries do today.

Clay tablets and papyrus plants contributed to first libraries.

clay tablet
Of course, in order to have a library, something must fill it up. In the ancient days of Egypt, the items took the form of clay tablets and papyrus plants.
As noted by Nureddin, researchers have learned that clay tablets were used as the primary medium for communication for many years. Inscriptions were carved into the wet clay surface using a stylus as the writing tool. Once dry, they took the form that archeologists have managed to dig up for centuries.
The inscribed clay tablets were thought to be used nearly 5,000 years ago, as early as 3020 B.C., for the use of theological matters, historical records and legends. However, as the centuries passed, a transition was made from clay tablets to papyrus plants that were used in a similar fashion as modern-day paper.
The Egyptians used the papyrus plant to create scrolls (or rolls) because they were light, durable, strong, thin and much easier to carry than the clay tablets. The papyrus plant was so popular that it was used centuries later in places like the holy city of Nippur, a part of the ancient Near East, as a way to create lists of Sumerian works of literature (myths, hymns, laments).
papyrus
In fact, the concept was able to carry over into modern times serving as the direct reason that we use trees for paper (the English word for papyrus) today.

The ancient library classification system.

With many societies placing so many of their ideas into written form, it was only a matter of time that the works would require some sort of organization. Research has shown that as early as 700 B.C., the first library classification system may have existed in Nineveh to accommodate their standardized writing.
However, these discoveries weren’t made until thousands of years later, in 1850, when workmen of Sir Austen Henry Layard at Nineveh found clay tablets in the ruins of the palace of Assur-bani-pal that had fallen from shelves.
What was interesting about the tablets was that they had been arranged in order. Researchers examining the ancient method determined that the people of Nineveh had formed what would be considered a library. In fact, some believe that the great library of Nineveh owed its existence to Assur-bani-pal.
Library of Ashurbanipal
A photograph of Tablet 4 of Gilgamesh, 669-627 B.C.
Over time, more than 30,000 clay tablets were discovered from the ruins in Nineveh and formed a collection called the Royal Library of Ashurbanipal (the collection is now found in the British Museum). It showcases the amazing Mesopotamian works and how they were organized into a system.

Classical Greek and Ancient Roman Libraries Step It up a Notch

The early attempts at libraries were indeed impressive, but as the centuries passed, new societies found their own ways of giving order to the writings and artistic efforts of their time – and in doing so were able to improve on the institution. Two of the first to make this effort were the Greeks and Romans.

Poets and philosophers received recognition.

In Greece around the 5th century B.C., private libraries were made up of non-fiction and fiction books, as opposed to societal or institutional records found in the societies prior. The works of poets like Euripides and philosophers like Aristotle were read and appreciated in classical Greek homes.

The next level of classification in Greece.

By around 296 B.C., another form of library organization became popularized. What’s interesting about this system, however, is that it was similar to the cataloging system found in the United States Library of Congress, in that it is alphabetical. The classification system was designed by Greek poet and scholar Callimachus and was used continuously during third century B.C. and throughout the Roman Empire.

Romans expanded to community-centered libraries.

Because the highly-advanced Greek culture had a heavy influence on the Ancient Roman culture, it was only a matter of time before works of the time were found in the homes of Roman citizens.
In the paper, Ancient Libraries of Greece and Rome by Cornell University librarian, Jacalyn C. Spoon, she explained that having books in the home was so important that it was highlighted by the family paintings people displayed. “The importance of literacy and books to the Roman people is clear in the portraits created,” she wrote.
Roman Portrait
Ancient Roman fresco woman holding a stylus and book
However, the Romans not only showcased the importance of books in the home, they expanded the concept by creating their version of the community-center (or public) libraries. Even Julius Caesar hoped to build a public library in Rome; however, he was assassinated before he was able to do so.
A significant contributor to the ancient Roman library was the wealth of the people of Rome. Learning was a big deal and something that was celebrated, which made citizens – especially the “learned men” –eager to share their knowledge.
After Caesar was murdered, numerous libraries were built, including two founded by Emperor Augustus and others by his successor Tiberius. Many libraries used the classification system derived from Greece and allow citizens to read or copy scrolls in both Latin and Greek.

Switching from scrolls to codex.

As more years progressed, libraries began to shift from the scrolls that had become commonplace to and more suitable codex format. The codex format was developed by the Romans in the 1st century A.D. from wooden writing tablets.
Example of Scroll vs. Codex
Noted difference between the scroll (roll) and codex
Codex was praised for its advantages over scroll because it was compact, sturdy and easy to use in terms of reference. By around 300 A.D., they were just as popular, if not more so, than the scroll. It also should be noted that codex was the first and current format of the Bible.

Early Islamic and Christian Religions Help Expand Libraries

As the years progressed, so did the advancement of libraries. By the 8th and 9th centuries, libraries began to expand through the newly Islamic lands known as the Middle East, as well as North Africa, Sicily and Spain.

Religion was the foundation of Islamic libraries.

Religion was deeply rooted in Islamic libraries. In fact, the first libraries in the Islamic civilization were at mosques and the first book to enter was the Qur’an. However, libraries also played a major role in changing the way people communicated. During this time, Muslims saw a significant shift from oral to written communication.

Islamic libraries grew in size and adopted modern qualities.

As libraries developed, they followed what the Romans started by adding books made mostly of paper and taking on a codex form. But Islamic libraries were able to expand on the concept of the library by increasing in size. The largest library of the period and global region would have been the Sufiya, the oldest mosque library, which was found in Aleppo and housed an estimated 10,000 volumes.
Then around the 8th century, Iranians and Arabs imported the craft of papermaking from China and began utilizing a paper mill in Baghdad. These early advancements enhanced public libraries and eventually helped them expand significantly throughout many Islamic cities by the 9th century.
Chinese Papermaking
Ancient Chinese papermaking, by Cai Lun in 105 AD.
Because the libraries were become so popular and well-occupied, leaders in the Middle East began building complex structures that would offer an impressive scenic quality to the standard structure. Some were surrounded by gorgeous gardens with lakes and waterways, while others added hundreds of rooms to accommodate catalogues, large seating areas and even areas for translators and copyists for the Persian, Greek, Roman and Sanskrit non-fiction and other literature.

Medieval Christian libraries emerged while others fell away.

Centuries after citizens put so much hard work into building and nurturing them, most Islamic libraries were destroyed by Mongolian invasions. Unfortunately, many Roman libraries suffered a similar fate due to a cutback in funds dedicated to literacy.
However, while the challenges of the time were wreaking havoc on some libraries, others, in particular, libraries that were associated with Medieval Christian monasteries, were beginning to crop up in scattered places through the Christian Middle East.
Medieval Library
Interior of the medieval library at the University of Leyden, dated 1610
The concept behind the medieval library was to reflect the value in manuscripts and the labor-intensive process that many had to endure to create them. As a result, many librarians took the time to chain books to lecterns, armaria or shelves and only would lend them if they were offered security deposits first.
Chained Library
Chained Library in Wimborne Minster

Lending became acceptable over time.

However, as time marched on, lending books became more popular. This was largely because librarians began to understand that lending a book to someone could mean that it would be copied while in the borrower’s possession. And if the work was copied, eventually the library could have a new title to add to its collection.

Bookpresses developed through early libraries.

Libraries during this time made a number of significant impacts on the printing and publishing world. In the early Christian libraries, bookpresses got their start by building shelves between back-to-back lecterns.
Libraries found themselves undergoing a number of changes to accommodate societal changes. Undoubtedly, there were more to come.

The Onset of Modern European and American Libraries

While libraries had already begun to initiate many changes that we still use today, there were more to come. Many took place with modern European and American libraries.

The marriage of libraries and academia.

One noticeable trend that occurred around the 15th century in central and northern Italy was the development of libraries that were purposefully created by humanists and other enlightened patrons to highlight academia. This represented a gradual shift from the focus on historical artifacts and religion that had been a part of the library’s history.
In Europe, university libraries were closely tied to Monastery libraries, which were most popular from the 12th to the 15th centuries. Their connection was obvious from the similarities in architecture to furniture. Also, their way of collecting and lending books was similar to monasteries in that they chose to keep their working collections under lock and key and make them only available for their residents.
However, by the late 15th century, there was a rapid rise in newly-constructed university library buildings that were separate structures, yet designated as a part of the college. As the years progressed further, colleges like Oxford began petitioning for funding to increase their library space. These desires for growth would help to bring on what was known as the “golden age of libraries.”
Old Bodleian Library - Oxford
Tower of Five Orders, Old Bodleian Library.

The golden age of libraries.

From the years 1600 to 1700, interest in libraries increased significantly. This occurred largely because the quantity of books increased and the costs associated decreased. Even more, there was a renewed interest in classical literature and culture, prompting nations to build great libraries and universities to accommodate and honor them.
During this time, some of the more important libraries were built, including the Bodleian Library at Oxford, the Mazarine Library in Paris, the Library of the British Museum and the National Central Library in Italy.

Public Libraries as We Know Them Today

Throughout history, public libraries had always been significant to societies. However, it wasn’t until after the golden age of libraries that they reemerged permanently and became primary establishments in communities around the world.

England’s creation of the modern public library.

In England, one of the first public libraries used by those who were not members of an institution such as a cathedral or college was Francis Trigge Chained Library in Grantham, Lincolnshire in 1598.
The Trigge Library is considered a forerunner of later public library systems. However, it wasn’t until the Public Libraries Act in 1850 was created by the U.K. Parliament and mandated that cities populated with 10,000 or more were asked to pay taxes in support of public libraries.
After the Libraries Act – and the 1870 Public School Law that helped to increase literacy – were enacted, the demand for libraries skyrocketed so that by 1877, more than 75 cities had established free libraries. By 1900, that number had grown to 300.

Public libraries expanded in the U.S.

In the United States, there were tons of examples of libraries that weren’t quite considered public, yet were very significant. For instance, the Library Company of Philadelphia, an independent research library that focused on American society and culture founded in 1731 by Benjamin Franklin, was considered to be the first successful lending library.
The Library Company of Pennsylvania - 1790
The Library Company of Philadelphia’s first building, completed in 1790
In addition, the Boston Athenaeum, which was first founded in Boston in 1807, was known as one of the first social libraries because it encouraged the community (mostly males in the early days) to come together in a social club setting.
By 1876, members of various library communities saw the need to come together as librarians and library administrators to promote the establishment. As a result, the American Library Association (ALA) was created. It is the oldest and largest library association in the world and promotes library education internationally.
New York Public Library
New York Public Library’s Main Reading Room
Only 10 years after the creation of the ALA, the first official U.S. public library was built: the New York Public Library. It was founded in 1886 and established by the estate of New York governor Samuel J. Tilden for $2.4 million. Currently one of the largest library systems in the world next to the United States’ Library of Congress and the British Library, it has grown from one to 89 libraries and has more than 50 million items.

Carnegie’s contributions.

Another major contributor to the public library system worldwide was Andrew Carnegie, a Scottish-American businessman and philanthropist who was greatly inspired by libraries and books in his youth. He is known for making great strides in his effort to bring forth libraries that were not only open to the public, but free as well.
Carnegie Free Library
Carnegie Free Library and Music Hall in Carnegie, Pennsylvania
The first of his Carnegie public library was actually built in 1883 in his hometown of Dunfermline, Scotland. However, by 1889, he’d built his first United States library in Braddock, Pennsylvania. Throughout the 1890s, he built hundreds of libraries and by 1929, 1689 total libraries in the United States alone had been funded by him with nearly another thousand built in other countries.
The Dewey classification system. In the same year that the American Library Association was established, Melvil Dewey, a founding member, published his decimal based system of classification, which organizes books on library shelves by assigning a number to a subject category.
For example, 100 is assigned to Philosophy & Psychology and within this category are subcategories that also have numbers assigned in increments of 10 (i.e. 110 Metaphysics, 120 Epistemology, 130 Paranormal phenomena, etc.)
The system helps librarians and patrons easily locate books on shelves and is used in 200,000 libraries in at least 135 countries to date. The classification system has undergone over 20 revisions since its first use, however. This is largely due to the changes in technology that have required updates to libraries, specifically in changing their structure to accommodate the digital era.

Card catalogs and digital libraries.

Card catalogs got their start in the 1800s when Charles Folsom, librarian of the Boston Athenaeum, suggested using a series of card, linked together with strings, to help keep order to the collection of books found in libraries.
His idea was taken to the next level, when in 1860 Harvard Librarian John Langdon Sibley proposed placing cards between two wooden blocks. Over the years, the catalogs moved into cabinets and became the standard format for locating books. That is, before the digital library emerged.
Card Catalog
Card Catalog in St Paul Public Library, 1958
Digital libraries were created to accommodate various forms of technology, including print, microform and of course, the Internet. They have also helped to transition libraries from the use of card catalogs as a book searching tool. The new use of technology reflects one of the most proud of the many changes we’ve seen in our globally since the beginning of libraries.
Modern library departments. As libraries evolved, their need for organization evolved as well. For that reason, modern public libraries began developing variations of the following departments to help maintain order:
Circulation: This department handles user accounts, as well as loaning and returning and shelving.
Reference: This section is usually meant for answering user questions or gaining access to specific reference books. Books in this section are usually not able to be checked out of the library.
Stacks maintenance: Those who belong to this department usually have the duty of re-shelving materials that have been returned to the library. Also, this department reads the material in the stacks to ensure that they are being classified correctly.
Collections: This department is in charge of ordering materials and maintaining materials budgets.
Technological services: The technological services department is usually in charge of cataloguing materials, as well as developing and maintaining databases to keep materials in order.
Libraries across the world have come a long way since their start many millenniums ago. Now there are thousands of public libraries worldwide and all of them have managed to adjust tremendously as society has changed, updating cataloging techniques as well as research tools and media options. And amazingly, they still offer us historical artifacts, document the current landscape of our lives and even offer a blueprint to guide us through our futures.
The fate of some libraries has been jeopardies in recent times due to the current recession and earlier financial troubles. However, most have managed to stay afloat by turning to their endowments and investments, as well as accepting contributions from foundations, individual donors and corporations.
Hopefully, these efforts will make help keep the library’s rich history going so that we may enjoy it for many centuries to come.

Tuesday, March 12, 2013

Printing Processes continued

Printmaking Processes
An original print is an image on paper or similar material made by one or more of the processes described here. Each medium has a special, identifiable quality, but because more than one impression of each image is possible, "original" does not mean "unique." Prints are multiple originals. The development of printmaking was connected to the development of movable type and the printing press in the fifteenth century, although woodblock printing had been done on textiles since ancient times. If you are interested in the history of printmaking, click on this link.
In contemporary printmaking, artists frequently number their prints. The total number of prints made of one image is an edition. The number may appear on the print with the individual print number as a fraction such as 5/25 meaning that this particular print is number 5 of 25 prints made.
Prints in color require two or more blocks, plates, screens or stones, one for each color, printed sequentially on top of each other to produce the final work of art. This process is called registration.
Prints can be classified according to the type of surface used to make them. Those with raised printing surfaces are known as relief prints; woodcuts are the most common type of relief print. When the printing surface is below the surface of the plate, the print technique is classified as intaglio. There are several important intaglio techniques. Planographic and stencil methods are also used, and print from a surface that is at the same level as the non-printing surface.





Relief Prints
Woodcuts are made by cutting into the broad face of a plank of wood, usually with a knife (the linocut is made the same way, except that linoleum is substituted for wood). In working the block, the artist cuts away areas not meant to print. These cut away areas appear in the finished print as the white parts of the design while the ink adheres to the raised parts. This link will take you to a Web site that contains an entire textbook on Woodblock printing by Hiroshi Yoshida Or also try this site which offers a set of past to recent examples of European relief printing.
Wood engravings are made by engraving a block of end-grain, extremely hard wood. The block, being naturally much harder, enables the artist to engrave (rather than cut) a much finer line than is possible on the softer plank surface used for woodcut. Albrect Durer (15th c.) used this technique in many of his works.
Intaglio
Intaglio printing involves the use of a metal plate. In printing, the ink settles in the sunken areas and the smooth surface of the plate is wiped clean. The plate, in contact with damp paper, is passed through a roller press under pressure. The paper is forced into the sunken areas to receive the ink. The plate can be incised by one of several methods:
·  Engraving The design is cut into the plate by driving furrows with a tool called a burin. The careful control required by the cutting method results in a rather stiff, controlled style of image, with shading accomplished through the use of parallel lines, or "hatching." The plate is printed in the manner described above. Hogarth (18th c.) is an artist who often created engravings.



·  Etching A metal plate is coated with a material called a ground. The artist then draws his design on the ground with a sharp needle, that cuts through the ground to the metal below. When the plate is put in an acid bath, these exposed areas will be etched (or eaten away). This produces the sunken line which will receive the ink. The artist etches on the plate those parts which will appear in the finished print as black or colored areas. Since the ground is soft, the artist is able to work more freely than is possible with engraving, displaying a freer, more relaxed quality of line. The length of time the plate is left in the acid bath will affect the darkness and character of the lines. Rembrandt (17th c.) did many etchings; scroll down in this link to select examples.
·  Drypoint In this technique, the sunken lines are produced directly by diamond-hard tools pulled across the plate. The depth of line is controlled by the artist's muscle and experience. The method of cutting produces a ridge along the incisions, called burr. This gives the dry-point line the characteristically soft, velvety appearance absent in the clean edged lines of an engraving or etching.



·  Aquatint A copper plate is protected by a powdered ground that is melted onto the surface of the plate. It is acid resistant, but covers incompletely, resulting in a grainy surface texture. The longer the plate is left in the acid bath, the darker and heavier the texture will become. It is usually combined with a standard etching ground that permits lines and clear white areas as well. The final effect is an image on a fine pebbled background (imparted by the porous ground). Aquatint is usually employed in combination with line etching when subtle value gradations are desired.
For additional information and examples of intaglio printing, try this link.
Planographic Prints: Lithograph
Lithograph is a planographic technique in which the artist draws directly on a flat stone or specially prepared metal plate (usually with a greasy crayon). The stone is dampened with water, then inked. The ink clings to the greasy crayon marks, but not to the dampened areas. When a piece of paper is pressed against the stone, the ink on the greasy parts is transferred to it. Toulouse-Lautrec and Picasso (left) are among the artists shown who used this technique. For additional information about lithographs, go to this site on litho technique .
Stencil prints: Silk Screen
Silk screen is a type of stencil. This technique first came into use in the early 20th century. The artist prepares a tightly stretched screen, usually of silk, and blocks out areas not to be printed by filling up the mesh of the screen with a varnish-like substance (or any number of other materials which would block up the pores of the fabric). Paper is placed under the screen and ink forced through the still-open mesh onto the paper. This technique is also widely used on textiles, including the ever-popular T-shirt. Robert Rauschenberg and Andy Warhol are examples of artists that used silkscreen.

Original Graphic Arts Processes
Process
Relief
Intaglio
Planographic
Stencil
Common Name:
Woodcut, linocut, embossing
Engraving, drypoint, mezzotint, etching, aquatint
Lithograph
Serigraph (silkscreen)
What Area Prints:
Prints what is left of the original surface
Prints what is below the surface of the plate
Prints what is drawn on the surface
Prints open areas of the stencil
Type of Press:
Manual pressure or letter press
Etching press (clothes-wringer type)
Lith Press (sliding, scraping pressure)
Original Serigraphs are usually hand screened
Materials:
Wood or linoleum block or other film material
Copper, zinc, plastics, etc.
Limestone, zinc, aluminum plates, etc.
Silk, nylon, etc.
Basic Tools:
Knife, gouge, burin, etc.
Etching needles, burins, acids
Litho crayon, tusche, litho rubbing ink, etc.
Squeegee, screen, screen blocker (liquid, photosensitive block or film)





Friday, March 8, 2013

Printing Methods Notes

Printing Methods
Welcome to the Printing Methods section of the Zoo Print School. This section serves to inform you of the multitude of different printing processes that may be employed to print your printed product.
The types of printing:
Digital Printing
Flexography
Letterpress Printing
Offset Printing
Rotogravure
Screen Printing
Digital Printing
Digital printing is the reproduction of digital images on physical surface, such as common or photographic paper, film, cloth, plastic, etc. It can be differentiated from litho printing in many ways, some of which are;
Every impression made onto the paper can be different, as opposed to making several hundred or thousand impressions of the same thing from one set of plates, as in traditional methods.
The Ink or Toner does not absorb into the paper, as does conventional Ink, but forms a layer on the surface.
It generally requires less waste in terms of chemicals used and paper wasted in set up.
Printing at home or in an office or engineering environment is subdivided into:
small format (up to ledger size paper sheets), as used in business offices and libraries
wide format (up to 3' or 914mm wide rolls of paper), as used in drafting and design establishments.
Some of the more common printing technologies are line printing — where pre-formed characters are applied to the paper by lines  daisy wheel — where pre-formed characters are applied individually
dot-matrix — which produces arbitrary patterns of dots with an array of printing studs
heat transfer — like early fax machines or modern receipt printers that apply heat to special paper, which turns black to form the printed image
blueprint — and related chemical technologies
inkjet — including bubble-jet — where ink is sprayed onto the paper to create the desired image
laser — where toner consisting primarily of polymer with pigment of the desired colours is melted and applied directly to the paper to create the desired image.
Vendors typically stress the total cost to operate the equipment, involving complex calculations that include all cost factors involved in the operation as well as the capital equipment costs, amortization, etc. For the most part, toner systems beat inkjet in the long run, whereas inkjets are less expensive in the initial purchase price.

Flexography
Flexography, often abbreviated to flexo, is a method of printing most commonly used for packaging.
 A flexo print is achieved by creating a mirrored master of the required image as a 3D relief in a rubber or polymer material. A measured amount of ink is deposited upon the surface of the printing plate (or printing cylinder) using an anilox roll. The print surface then rotates, contacting the print material which transfers the ink.
 Flexo is so named because it was originally used as a method of printing onto corrugated cardboard, which has a very uneven surface. It is required that the printing plate surface maintain contact with the cardboard, which it does by being flexible. Also, unprinted high points on the cardboard must not get printed by ink remnants not on the plate surface, which is achieved by ensuring a sufficient depth for the non-print areas of the plate.
 Originally flexo printing was very low quality. In the last 3 decades great advances have been made, including improvements to the plate material and the method of plate creation—usually photographic exposure followed by chemical etch, though also by direct laser engraving. Laser-etched anilox rolls also play a part in the improvement of print quality. Full colour picture printing now occurs, and some of the finer presses available today in combination with a skilled operator allow quality that rivals the lithographic process. One ongoing improvement has been the increasing ability to reproduce highlight tonal values, thereby providing a workaround for the very high dot gain associated with flexo print.

Flexo has an advantage over lithography in that it can use a wider range of inks and is good at printing on a variety of different materials. Flexo inks, like those used in gravure and unlike those used in lithography generally have low viscosity. This enables faster drying and, as a result, faster production; that means low cost. Printing press speeds of 450 meters per minute are regular with modern technology high end printers, like Windmoeller und Hollscher or Schiavi type. The main printing process worldwide for flexible packaging are rotogravure, for very large runs, and flexo for large and medium runs.
 Also Known As:
 Flexographic printing
Flexo
Surface printing
Examples:
 Some typical applications for flexography are paper and plastic bags, milk cartons, disposable cups, and candy bar wrappers. Flexography printing may also be used for envelopes, labels, and newspapers.

Letterpress Printing
Letterpress printing is a term for printing text with movable type, in which the raised surface of the type is inked and then pressed against a smooth substance to obtain an image in reverse. In addition to the direct impression of inked movable type onto paper or another receptive surface, the term letterpress can also refer to the direct impression of inked media such as zinc "cuts" (plates) or linoleum blocks onto a receptive surface.

Early Chinese woodblock printing used characters or images carved in relief from before 750AD, and this form of printing was widespread throughout Eurasia as a means of printing patterns on textiles. Printing of images, first on cloth, then from about 1400 on paper was practised in Europe. In the 1400s, Johann Gutenberg (among others) is credited with the invention of movable type printing from individually-cast, reusable letters set together in a forme. This had previously been invented in Asia, but the two inventions were probably not connected. He also invented a wooden printing-press where the type surface was inked and paper laid carefully on top by hand, then slid under a padded surface and pressure applied from above by a large threaded screw. Later metal presses used a knuckle and lever arrangement instead of the screw, but the principle was the same.

With the advent of industrial mechanisation, the inking was carried out by rollers which would pass over the face of the type and move out of the way onto a separate ink-bed where they would pick up a fresh film of ink for the following sheet. Meanwhile a sheet of paper was slid against a hinged platen (see image) which was then rapidly pressed onto the type and swung back again to have the sheet removed and the next sheet inserted (during which operation the now freshly-inked rollers would run over the type again). In a fully-automated 20th century press, the paper was fed and removed by vacuum sucker grips.

Rotary presses were used for high-speed work. In the oscillating press, the forme slid under a drum around which each sheet of paper got wrapped for the impression, sliding back under the inking rollers while the paper was removed and a new sheet inserted. In a newspaper press, a papier-mâché mixture (flong) was used to make a mould of the entire forme of type, then dried and bent, and a curved metal plate cast against it. The plates were clipped to a rotating drum, and could thus print against a continuous reel of paper at the enormously high speeds required for overnight newspaper production.

As computerised typesetting and imaging replaced cast metal types, letterpress began to die out, as high-speed photographic imaging onto smooth flexible plates (lithography) became more economical. However, photopolymer plates and the invention of Ultra-Violet curing inks has helped keep rotary letterpress alive in areas like self-adhesive labels. There is also still a large amount of flexographic printing, a similar process, which uses rubber plates to print on curved or awkward surfaces, and a lesser amount of relief printing from huge wooden letters for lower-quality poster work.
 Also Known As:
Offset Letterpress
Relief Printing
Examples:
 Mostly replaced by offset printing and other processes, letterpress printing is still used for some newspapers, books, and limited edition prints. Letterpress printing may also be used for printing business cards, letterhead, posters, and some forms.
 Offset Printing
Offset printing is a widely used printing technique where the inked image is transferred (or "offset") from a plate to a rubber blanket, then to the printing surface. When used in combination with the lithographic process, which is based on the repulsion of oil and water, the offset technique employs a flat (planographic) image carrier on which the image to be printed obtains ink from ink rollers, while the non-printing area attracts a film of water, keeping the non-printing areas ink-free.

Advantages of offset printing include:

Consistent high image quality. Offset printing produces sharper and cleaner images and type than letterpress printing because the rubber blanket conforms to the texture of the printing surface.
Quick and easy production of printing plates.
Longer printing plate life than on direct litho presses because there is no direct contact between the plate and the printing surface.
 Also Known As:
 Lithographic
Offset
Planographic
Examples:

Offset lithography is the most commonly used commercial printing process for the bulk of desktop publishing on paper. Offset lithography is used on both sheet-fed and web offset presses.

Rotogravure Printing
Rotogravure is a type of intaglio printing process, in that it involves engraving the image onto an image carrier. In gravure printing, the image is engraved onto a copper cylinder because, like offset and flexography, it uses a rotary printing press. The vast majority of gravure presses print on reels of paper, rather than sheets of paper. (Sheetfed gravure is a small, specialty market.) Rotary gravure presses are the fastest and widest presses in operation, printing everything from narrow labels to 12-feet-wide rolls of vinyl flooring. Additional operations may be in-line with a gravure press, such as saddle stitching facilities for magazine/brochure work.

In 1932 a George Gallup "Survey of Reader Interest in Various Sections of Sunday Newspapers to Determine the Relative Value of Rotogravure as an Advertising Medium" found that rotogravures were the most widely read sections of the paper and that advertisements there were three times more likely to be seen by readers than in any other section. The rotogravure process is still used for commercial printing of magazines, postcards, and corrugated (cardboard) product packaging.

In the latter quarter of the 19th centure, the method of image photo transfer onto carbon tissue covered with light-sensitive gelatin was discovered and was the beginning of rotogravure.

Gravure cylinders nowadays are typically engraved digitally by a diamond tipped or laser etching machine. On the gravure cylinder, the engraved image is composed of small recessed cells (or 'dots') that act as tiny wells. Their depth and size control the amount of ink that gets transferred to the substrate (paper or other material, such as plastic or foil) via a process of pressure, osmosis, and electrostatic pull. (A patented process called "Electrostatic Assist" is sometimes used to enhance ink transfer.)

A rotogravure printing press has one printing unit for each color, typically CMYK or cyan, magenta, yellow and key (printing terminology for black). The number of units vary depending on what colors are required to produce the final image. There are five basic components in each color unit: an engraved cylinder (whose circumference can change according to the layout of the job), an ink fountain, a doctor blade, an impression roller, and a dryer. While the press is in operation, the engraved cylinder is partially immersed in the ink fountain, filling the recessed cells. As the cylinder rotates, it draws ink out of the fountain with it. Acting as a squeegee, the doctor blade scrapes the cylinder before it makes contact with the paper, removing ink from the non-printing (non-recessed) areas. Next, the paper gets sandwiched between the impression roller and the gravure cylinder. This is where the ink gets transferred from the recessed cells to the paper. The purpose of the impression roller is to apply force, pressing the paper onto the gravure cylinder, ensuring even and maximum coverage of the ink. Then the paper goes through a dryer because it must be completely dry before going through the next color unit and absorbing another coat of ink.

Because gravure is capable of transferring more ink to the paper than other printing processes, gravure is noted for its remarkable density range (light to shadow) and hence is a process of choice for fine art and photography reproduction, though not typically as clean an image as that of sheet fed litho or web offset litho. Gravure is widely used for long-run magazine printing in excess of 1 million copies. Gravure's major quality shortcoming is that all images, including type and "solids," are actually printed as dots, and the screen pattern of these dots is readily visible to the naked eye. Examples of gravure work in the United States are typically long-run magazines, mail order catalogs, consumer packaging, and Sunday newspaper ad inserts.

Other application area of gravure printing is in the flexible packaging sector. A wide range of substrates such as Polyethylene, Polypropylene, Polyester, BOPP etc can be printed in the gravure press.



Also Known As:

Gravure
Examples:

Gravure printing is often used for high-volume printing of packaging, wallpaper, and giftwrap using fast-drying inks. Although less common, gravure printing may also be used for printing magazines, greeting cards, and high-volume advertising pieces.

Screen Printing
Screen printing is a printmaking technique that creates a sharp-edged image using a stencil. A screen print or serigraph is an image created using this technique.

A screen is made of a piece of porous, finely woven fabric (originally silk, but typically made of polyester or nylon since the 1940s) stretched over an aluminum frame. Areas of the screen are blocked off with a non-permeable material—a stencil—which is a positive of the image to be printed; that is, the open spaces are where the ink will appear.

The screen is placed on top of a piece of dry paper or fabric. Ink is placed on top of the screen, and a squeegee (rubber blade) is used to push the ink evenly into the screen openings and onto the substrate. The ink passes through the open spaces in the screen onto the paper or fabric below; the screen is lifted away and then the squeegee is pushed back across the screen, with the screen lifted, "flooding" the ink into the screen. The screen can be re-used after cleaning. If more than one color is being printed on the same surface, the ink is allowed to dry and then the process is repeated with another screen and different color of ink.
 While the public thinks of garments in conjunction with screen printing, the technique is used on tens of thousands of items, including birthday cake designs, decals, clock and watch faces, and many more products. The vast majority of silk-screen printings are monochromatic. 
Graphic screen printing is widely used today to create many mass or large batch produced graphics, such as posters or display stands. Full color prints can be created by printing in CMYK (cyan, magenta, yellow and black). Screen printing is often preferred over other processes such as dye sublimation or inkjet printing.
Also Known As:
 Silkscreening
Serigraphy
Examples:
Screen printing can be used to print images on T-shirts, hats, CDs, DVDs, ceramics, glass, polyethylene, polypropylene, paper, metals, and wood.